Specification Collection Form

Step 1 of 2

Machine Type:*
Type of Lathe:
Control:
Swing over ways:
Swing over crosslide:
Swing in front of chuck:
Chuck diameter:
Max. workweight:

(Chuck only and with tailstock)
Max. torque on main spindle:
Travel X:
Travel Z:
Rapid traverse X:
Rapid traverse Z:
Tool turret:

(no. of positions / size of tools)
Spindle bore:
Spindle nose:
Spindle speeds:
Longitudinal feed rate:
Hex turret, face size:
Hex turret, distance across flats:
Motor 30 min/cont:
Electrics:
L x D x H:
Weight approximate:
Swing over bed:
Swing over carriage:
Max. turning diameter:
Max. distance between centers:
Automatic turret changer:
Max. size of tools:
Tailstock stroke:
Tailstock spindle:
Tailstock taper:
Swing in gap:*
Swing in cut-out:
Length of gap:

(in front of spindle nose)
Length of cut-out:

(in front of spindle nose)
Width of bedway:
Tailstock quill diameter:
Tailstock quill stroke:
Max. weight between centers:

(w/o steadies)
Feeds, longitudinal:
Feeds, cross:
Feeds, top slide:
Threading range, metric:
Leadscrew diameter x pitch:
Main motor:
Overall dimensions:

(L x W x H)
Machining length:
Gap diameter:
Feeds longitudinal:
Feeds cross:
Feeds top slide:
Thread cutting inch:
Type of Milling Machine:
Table size:
Table load:
Control:
Travel X axis table longitudinal:
Travel Y axis crosslide in and out:
Travel Z1 axis spindle head up and down:
Travel Z2 axis quill up and down:
Min./max distance spindle nose to table:
Distance centerline spindle to column ways:
Spindle speeds:
Spindle drive rating (30 min./cont):
Spindle torque rating:
Spindle diameter at lower bearings:
Spindle flange / taper:
Milling feed rates:
Z axis thrust:
Rapid traverse X/Y axis:
Rapid traverse Z axis:
Ball screw diameter:
Tool storage capacity:
Maximum tool diameter/length/weight:
Maximum tool diameter adjacent pockets open:
Air requirements:
Electrics:
Overall dimensions:
Weight approximate:
Air requirements:
Table swivel left, right:
Table travels longitudinal:
Table travels cross:
Knee travel vertical:
Min./max distance CL horizontal spindle to table:
Min./max distance vertical spindle to table:
Min./max distance CL vertical spindle to column:
Spindle taper horizontal:
Spindle taper vertical:
Spindle speeds horizontal:
Main drive motor:
Spindle taper vertical attachment:
Overarm cross travel:
Quill travel:
Overarm drive motor:
Spindle taper:
Quill diameter:
Saddle width:
Min./max dist. spindle to table (@ 90 degrees):
Maximum work weight:
Spindle motor:
Type of Boring Mill:
Maximum drilling diameter from solid:
Maximum drilling depth:
Swing over bed:
Length of bed:
Width of bedways:
Work-spindle speeds:
Tool-spindle speeds:
Feedrates:
Rapid traverse rate:
Spindle drive motor:
Total connected load:
Electrics:
Thread cutting (if app.):
Machine dimensions (W x D x H):
Weight approximate:
Control:
Spindle diameter:
Travels :
X axis (cross) Y axis (vertical)
Spindle taper:
Table size:
Travels :
X axis (cross) Y axis (vertical) Z axis (in/out) W axis (longitudinal)
Maximum work weight
Facing head diameter:
Max distance spindle to tailstock:
Maximum facing capacity:
Spindle speeds:
Feeds:
X axis (cross) Y axis (vertical) Z axis (longitudinal)
Facing head speeds:
Feeds spindle:
Rapid traverse:
Motor spindle drive:
Electrics:
Overall L x W x H:
Weight approximate:
Type of Drills:
Maximum drilling diameter insert drill:
Maximum flange diameter:
Maximum workpiece length:
Maximum drill stroke:
Maximum spindle speed:
Spindle drive motor:
Spindle drive motor:
Min./max distance CL spindle to column:
Column diameter:
Spindle taper:
Spindle diameter:
Spindle travel:
Spindle speeds:
Traverse of head on arm (horizontal):
Traverse of arm on column (vertical):
Working surface of base:
Height of base:
Min./max distance spindle to baseplate:
Drilling capacity in steel:
Boring capacity in steel:
Tapping capacity in steel:
Feeds:
Tapping feeds:
Spindle motor:
Electrics:
Overall dimensions (L x W x H):
Weight approximate:
Capacity:
Distance between side frames:
Max height under ram:
Maximum stroke:
Closed daylight:
Bed left to right:
Bed front to back:
Frame opening in sides:
Opening in bed:
Throat center of ram to frame:
Ram diameter:
Cylinder outside diameter:
Ram platen T-sloted:
Approach speed fast:
Approach speed slow:
Pressing speed fast:
Pressing speed slow:
Returning speed:
Motor:
Electrics:
Overall W x D x H:
Pit requirements:
Approximate weight:
Type of Saw:
Cutting capacity round:
Cutting capacity flat:
Cutting capacity 45 degrees:
Cutting capacity 45 degrees:
Blade size:
Blade drive wheels:
Blade guide system:
Blade tension:
Drive motor:
Blade speeds:
Coolant capacity:
Floor space:
Workheight:
Weight:
Electrics:
Throat:
Maximum workheight:
Table size:
Sawhead tilt left-right:
Band size:
Band wheels diameter:
Motor:
Electrics:
Type of Grinder:
Height of centers:
Max grinding diameter:
Max length between centers:
Table length:
Max size of grinding wheel:
Universal table swivel range:
Table feed range infinitely variable:
Incremental wheelhead feed:
Rapid traverse of wheelhead:
Wheel speed full diameter:
Workhead speed:
Hydraulic tank capacity:
Coolant tank capacity:
Main motor:
Workhead motor:
Electrics:
Wheelhead motor:
Overall dimensions:
Approximate height:
Internal attachment motor:
Table working surface:
Table travels longitudinal:
Table travels cross:
Max distance CL spindle to table:
Wheelhead travel vertical:
Grinding wheel size:
Grinding wheel speed:
Longitudinal table feeds:
Spindle motor:
Hydraulic pump motor:
Weight approximate:
Weight approximate:
Min./max distance wheel to table:
Maximum work weight:
Grinding wheel diameter:
Spindle speeds:
Vertical feed rate:
Wheelhead rapid traverse:
Coolant delivery:
Table diameter:
Chuck diameter:
Max grinding height over rotary table:
Max recommended grinding wheel size:
Table speeds:
Grinding spindle speeds:
Make:
Model:
Serial:
Year:
Condition:
Status:
Miscellaneous Features:

Save and Continue Later

X axis (cross)	Y axis (vertical)

X axis (cross)	Y axis (vertical)	Z axis (in/out)	W axis (longitudinal)

X axis (cross)	Y axis (vertical)	Z axis (longitudinal)