VDF E3H

  • VDF E3H
  • VDF E3H
  • VDF E3H
  • VDF E3H
  • VDF E3H
  • VDF E3H

[table width =”100%” style =”table-striped table-bordered” responsive =”true”]
[table_body]
[table_row]
[row_column] Swing over bed: [/row_column]
[row_column] 23.5″ [/row_column]
[/table_row]
[table_row]
[row_column] Swing over crosslide: [/row_column]
[row_column] 14″ [/row_column]
[/table_row]
[table_row]
[row_column] Swing in cut-out: [/row_column]
[row_column] 24.5″ [/row_column]
[/table_row]
[table_row]
[row_column] Width of bed way: [/row_column]
[row_column] 16″ [/row_column]
[/table_row]
[table_row]
[row_column] Spindle bore: [/row_column]
[row_column] 3-1/8″ [/row_column]
[/table_row]
[table_row]
[row_column] Spindle nose: [/row_column]
[row_column] D1-8 Camlock [/row_column]
[/table_row]
[table_row]
[row_column] Tailstock taper: [/row_column]
[row_column] MT5 [/row_column]
[/table_row]
[table_row]
[row_column] Tailstock quill diameter: [/row_column]
[row_column] 3-1/8″ [/row_column]
[/table_row]
[table_row]
[row_column] Spindle speeds: [/row_column]
[row_column] 18-900 RPM [/row_column]
[/table_row]
[table_row]
[row_column] Feeds, longitudinal: [/row_column]
[row_column] 0.0011″ – 0.056″ / Rev [/row_column]
[/table_row]
[table_row]
[row_column] Threading range, inch: [/row_column]
[row_column] 0.25″ – 140 TPI [/row_column]
[/table_row]
[table_row]
[row_column] Threading range, metric: [/row_column]
[row_column] 0.2″ – 112 mm [/row_column]
[/table_row]
[table_row]
[row_column] Leadscrew diameter x pitch: [/row_column]
[row_column] 2″ dia. x 2 TPI [/row_column]
[/table_row]
[table_row]
[row_column] Main motor: [/row_column]
[row_column] 15 HP [/row_column]
[/table_row]
[table_row]
[row_column] Electrics: [/row_column]
[row_column] 230-460/3/60 [/row_column]
[/table_row]
[table_row]
[row_column] Overall dimensions (L x W x H): [/row_column]
[row_column] 105″ x 55″ x 57″ [/row_column]
[/table_row]
[/table_body]
[/table]

Equipped with:
[table width =”100%” style =”table-striped table-bordered” responsive =”true”]
[table_body]
[table_row]
[row_column] Coolant System [/row_column]
[/table_row]
[table_row]
[row_column] Double V-ways [/row_column]
[/table_row]
[table_row]
[row_column] Quick change tool post [/row_column]
[/table_row]
[table_row]
[row_column] Steady rest with roller jaws [/row_column]
[/table_row]
[table_row]
[row_column] Taper attachment [/row_column]
[/table_row]
[table_row]
[row_column] Thread chasing dial DRO [/row_column]
[/table_row]
[/table_body]
[/table]

Division: Pre-Owned Equipment
Stock #: 500-090
Location: Edmonton, AB
Type: Lathes, Conventional & Hollow Spindle
Brand: VDF
Model: E3H
Year: 1976
Back to top

BFG Machine Tools Inc.