[table width =”100%” style =”table-striped table-bordered” responsive =”true”]
[table_body]
[table_row]
[row_column] Swing over bed: [/row_column]
[row_column] 22” [/row_column]
[/table_row]
[table_row]
[row_column] Swing over crosslide: [/row_column]
[row_column] 16” [/row_column]
[/table_row]
[table_row]
[row_column] Swing in gap: [/row_column]
[row_column] 38” [/row_column]
[/table_row]
[table_row]
[row_column] Length of gap (in front of spindle nose): [/row_column]
[row_column] 10” [/row_column]
[/table_row]
[table_row]
[row_column] Width of bedway: [/row_column]
[row_column] 16” [/row_column]
[/table_row]
[table_row]
[row_column] Max distance between centers: [/row_column]
[row_column] 96” [/row_column]
[/table_row]
[table_row]
[row_column] Spindle bore: [/row_column]
[row_column] 3-1/8” [/row_column]
[/table_row]
[table_row]
[row_column] Spindle nose: [/row_column]
[row_column] D1-8 Camlock [/row_column]
[/table_row]
[table_row]
[row_column] Tailstock taper: [/row_column]
[row_column] MT#5 [/row_column]
[/table_row]
[table_row]
[row_column] Tailstock quill diameter: [/row_column]
[row_column] 3-1/4” [/row_column]
[/table_row]
[table_row]
[row_column] Spindle speeds: [/row_column]
[row_column] 20 – 1000 (12) [/row_column]
[/table_row]
[table_row]
[row_column] Feeds, longitudinal: [/row_column]
[row_column] 0.0009 – 0.051 IPR [/row_column]
[/table_row]
[table_row]
[row_column] Feeds, cross: [/row_column]
[row_column] 0.0005 – 0.022 IRP [/row_column]
[/table_row]
[table_row]
[row_column] Threading range, inch: [/row_column]
[row_column] 112 – 2 TPI [/row_column]
[/table_row]
[table_row]
[row_column] Threading range, metric: [/row_column]
[row_column] 0.25 – 14 mm [/row_column]
[/table_row]
[table_row]
[row_column] Leadscrew diameter x pitch: [/row_column]
[row_column] 1.75 x 2.5 TPI [/row_column]
[/table_row]
[table_row]
[row_column] Main motor: [/row_column]
[row_column] 12.5 HP [/row_column]
[/table_row]
[table_row]
[row_column] Electrics: [/row_column]
[row_column] 220V, 3 PH, 60 [/row_column]
[/table_row]
[table_row]
[row_column] Weight: [/row_column]
[row_column] 7500 lbs [/row_column]
[/table_row]
[table_row]
[row_column] Dimensions: [/row_column]
[row_column] 156” x 40” x 60” [/row_column]
[/table_row]
[/table_body]
[/table]

Equipped with:
[table width =”100%” style =”table-striped table-bordered” responsive =”true”]
[table_body]
[table_row]
[row_column] 20” Pratt Barnerd Independent 4-jaw chuck [/row_column]
[/table_row]
[table_row]
[row_column] Taper attachment [/row_column]
[/table_row]
[table_row]
[row_column] Plain jaw steady rest, 8” cap [/row_column]
[/table_row]
[table_row]
[row_column] Induction hardened bedways [/row_column]
[/table_row]
[/table_body]
[/table]